Lilemong tsa morao tjena, indasteri ea UV ea UV e bone kholo ka potlako, 'me khatiso ea dijithale ea UV e ile ea tobana le mathata a macha. Ho fihlela mekhoa e ntseng e eketseha ea ts'ebeliso ea mochini, likoluoa le ho ntlafatsoa ha ho hlokahala ho latela khatello ea maikutlo le lebelo.
Ka 2019, Khampani ea Rioh ea Khanna e Lokisang Rioshe G6 Printhead, e leng e ileng ea etsa hore indastering ea khatiso ea UVS. Bokamoso ba mochini oa khatiso oa UVIY o kanna oa fetela pele. (Epson le eena o lokolle lihlooho tse ncha tse kang I3200, joalo-joalo. Mookoli oa mookoli o bolokile lebelo le mekhoa ea mmaraka, ho tloha ka nako eo, sebelisa mefuta ea eona ea Rico G6.
| MH5420 (Gen5) | MH5320 (Gen6) | |
|---|---|---|
| Mokhoa | Piston Pushuther ka tšepe ea metallic daphragm | |
| Hatisa bophara | 54.1 mm (2.1 ") | |
| Palo ea li-nozzles | 1,280 (4 × 320 liteishene), li tsitsipane | |
| Nozzle spacing (4 Ho hatisa) | 1/150 "(0.1693 mm) | |
| Nozzle spacing (mola ho ea hole) | 0.55 mm | |
| Nozzle spacing (holimo le sebaka se ka holimo sa marang-rang) | 11.81mm | |
| E lumellana ka enke | UV, ea sotlehileng, ea halefileng, tse ling. | |
| Litekanyo tse akaretsang tsa printime | 89 (w) × 69 (d) × 24,51 (H) mm (h) mm (H) mm (37 " | 89 (w) × 66.3 (D) × 24,51 (H) mm (H) mm (H) mm (H) MM (3,5 "× 1.0") |
| Boima | 155g | 228g (ho kenyeletsoa cable ea 45c) |
| Max.number of colour | Mebala e 2 | 2 / 4colors |
| Ho sebetsa molumo oa mocheso | Ho fihla ho 60 ℃ | |
| Taolo ea mocheso | Heater e kopaneng le thermostor | |
| Frequency frequency | Mode oa Binary: 30KHZ Green-Spert Mode: 20KHZ | 50khz (maemo a 3) 40khz (maemo a 4) |
| Drop burge | Mode ea Binary: 7PS / Mode-Flamed Mode: 7-35pl * ho latela enke | Mokhoa oa Binary: 5pl / Mode oa Gray: |
| Lipalesa tsa liketsahalo tsa pono | 10-12 MPA • s | |
| Tsitsipano ea bokaholimo | 28-35mn / m | |
| Gray-Scale | Maemo a 4 | |
| Bolelele ba Bolelele | 248 limilimithara (Standard) ho kenyeletsa le likhoele | |
| Ink Port | Ho joalo | |
Litafole tsa paramente ea semmuso tse fanoeng ke bahlahisi li ka bonahala li sa utloisisehe ebile ho thata ho li khetholla. Ho fana ka setšoantšo se hlakileng, mookoli oa mookoli o hlakisitsoeng o tsamaisoang ka libaka tsa khatiso oa marang-rang o sebelisang mohlala o le mong oa Rioos RB-2513
| Printa | Hatisa hlooho | Mokhoa oa ho hatisa | |||
|---|---|---|---|---|---|
| 6 Pass | tataiso e le 'ngoe | 4 Pass | Bi-Tataiso | ||
| Nano 2513-g5 | Gen 5 | nako ea khatiso ka botlalo | 17.5mins | nako ea khatiso ka botlalo | 5.8mins |
| nako ea khatiso ka sqm | 8mins | nako ea khatiso ka sqm | 2.1mins | ||
| lebelo | 7.5sqm / h | lebelo | 23sqm / h | ||
| Nano 2513-g6 | Gen 6 | nako ea khatiso ka botlalo | 11.4mins | nako ea khatiso ka botlalo | 3.7mins |
| nako ea khatiso ka sqm | 5.3mins | nako ea khatiso ka sqm | 1.8mins | ||
| lebelo | 11.5sqm / h | lebelo | 36sqm / h |
Joalokaha ho bontšitsoe tafoleng e kaholimo, The Riomy Chris Adtheosad Prints Haufi haholo ho feta ka hora ea G5, e hlahisa phaello e lekanang.
Riomy G6 Chnad ea The Riomy e khona ho fumana maqhubu a ho teba a 50 khZ, a kopana le litlhoko tse lebelo le phahameng. Ha ho bapisoa le mohlala oa Rioh G5, o fana ka keketseho ea 30% ka lebelo, ntlafatsa ts'ebetso ea khatiso.
Boholo ba eona bo fokolisitsoeng ka marotholi le ntlafatso ea petting ho thusa boleng bo botle ba petting ntle le ho lokisa haholoanyane ntle le ho nepahala ha ho be le tokelo. Sena se lumella khatiso e totobalang haholo ka ho teneha ho fokolang. Ho feta moo, nakong ea ho fafatsa ka makhetlo a manyane, khafetsa khafetsa ho eketsa lebelo la khatiso le katleho ea ho hatisa ka 500 DPI. Ha ho bapisoa le G5's 7Pl, litšoantšo tse hatisitsoeng le tsona li tla ba le tsona.
Bakeng sa mochini o hatisang oa UV oa Flat o bataletseng, onios g6 oa indasteri o le mong oa indasteri o sebelisoa haholo 'marakeng, o feta toshiba Chrishiba Christiads toshibans. Riomy Chmead ke mofuta o ntlafalitsoeng oa ngoan'eno, 'me ho tla ka mefuta e meraro: gen-gen-mmala o le mong), le gen6 -Bish Mh5360 ('mala o le mong ka' mala oa botšelela). Litšobotsi tsa bohlokoa tsa eona li kenyelletsa lebelo le phahameng, ho nepahala haholo, haholo ke tlhahiso e totobetseng, moo e ka khannoang mongolo oa 0.1mm ka ho hlaka.
Haeba u batla mochini oa khatiso o moholo oa hau o fanang ka lebelo le boleng bo phahameng, ka kopo ikopanye le litsebi tsa mahala bakeng sa likeletso tsa mahala le tharollo e felletseng.
Nako ea poso: Apr-29-2024